level 2
同问angel
2022年03月03日 09点03分
level 1
2.4 Running Stellarium
2.4.1 Windows
The Stellarium installer creates a whole list of items in the Start Menu under the Programs/Stellarium section. The list evolves over time, not all entries listed here may be installed on yoursystem. Select one of these to run Stellarium:
Stellarium OpenGL version. This is the most efficient for modern PCs and should be usedwhen you have installed appropriate OpenGL drivers. Note that some graphics cards are“blacklisted” by Qt to immediately run via ANGLE (Direct3D), you cannot force OpenGL inthis case. This should not bother you.
Stellarium (ANGLE mode) Uses Direct3D translation of the OpenGL rendering via ANGLElibrary. Forces Direct3D version 9.
Stellarium (MESA mode) Uses software rendering via MESA library. This should work on anyPC without dedicated graphics card.
Stellarium (200%) On some systems with 4k screens, Stellarium appears too small. This linkforces an upscaling.
If for some reason Stellarium’s dialogs and buttons appear too large, and you want to scalethem down, edit the link and change the scaling parameter.
On startup, a diagnostic check is performed to test whether the graphics hardware is capable ofrunning. If all is fine, you will see nothing of it. Else you may see an error panel informing youthat your computer is not capable of running Stellarium (“No OpenGL 2 found”), or a warningthat there is only OpenGL 2.1 support. The latter means you will be able to see some graphics,but depending on the type of issue you will have some bad graphics. For example, on an IntelGMA4500 there is only a minor issue in Night Mode, while on other systems we had reports ofmissing planets or even crashes as soon as a planet comes into view. If you see this, try running inDirect3D 9 or MESA mode, or upgrade your system. The warning, once ignored, will not showagain.
When you have found a mode that works on your system, you can delete the other links.
这是Stellarium 用户手册上的，你自己翻译吧
2022年05月27日 06点05分
6
2.4.1 Windows
The Stellarium installer creates a whole list of items in the Start Menu under the Programs/Stellarium section. The list evolves over time, not all entries listed here may be installed on yoursystem. Select one of these to run Stellarium:
Stellarium OpenGL version. This is the most efficient for modern PCs and should be usedwhen you have installed appropriate OpenGL drivers. Note that some graphics cards are“blacklisted” by Qt to immediately run via ANGLE (Direct3D), you cannot force OpenGL inthis case. This should not bother you.
Stellarium (ANGLE mode) Uses Direct3D translation of the OpenGL rendering via ANGLElibrary. Forces Direct3D version 9.
Stellarium (MESA mode) Uses software rendering via MESA library. This should work on anyPC without dedicated graphics card.
Stellarium (200%) On some systems with 4k screens, Stellarium appears too small. This linkforces an upscaling.
If for some reason Stellarium’s dialogs and buttons appear too large, and you want to scalethem down, edit the link and change the scaling parameter.
On startup, a diagnostic check is performed to test whether the graphics hardware is capable ofrunning. If all is fine, you will see nothing of it. Else you may see an error panel informing youthat your computer is not capable of running Stellarium (“No OpenGL 2 found”), or a warningthat there is only OpenGL 2.1 support. The latter means you will be able to see some graphics,but depending on the type of issue you will have some bad graphics. For example, on an IntelGMA4500 there is only a minor issue in Night Mode, while on other systems we had reports ofmissing planets or even crashes as soon as a planet comes into view. If you see this, try running inDirect3D 9 or MESA mode, or upgrade your system. The warning, once ignored, will not showagain.
When you have found a mode that works on your system, you can delete the other links.
这是Stellarium 用户手册上的，你自己翻译吧
level 1
2.4运行Stellarium
窗口
Stellarium安装程序会在程序/Stellarium部分的开始菜单中创建一个完整的项目列表。该列表会随着时间的推移而变化，并非此处列出的所有条目都会安装在您的系统上。选择其中一个来运行Stellarium:
Stellarium OpenGL版本。这对于现代电脑来说是最有效的，当你安装了合适的OpenGL驱动程序时应该使用。请注意，有些显卡被Qt“列入黑名单”以立即通过ANGLE (Direct3D)运行，在这种情况下，您不能强制使用OpenGL。这不应该打扰你。
Stellarium(角度模式)通过ANGLElibrary使用OpenGL渲染的Direct3D转换。强制Direct3D版本9。
Stellarium (MESA模式)通过MESA库使用软件渲染。这应该在没有专用显卡的anyPC上工作。
Stellarium (200%)在一些4k屏幕的系统上，Stellarium显得太小。这种联系迫使规模扩大。
如果由于某种原因，Stellarium的对话框和按钮显得太大，而您想缩小它们，请编辑链接并更改缩放参数。
启动时，会执行诊断检查，以测试图形硬件是否能够运行。如果一切正常，你将什么也看不见。否则，您可能会看到一个错误面板，通知您您的计算机无法运行Stellarium(“未找到OpenGL 2”)，或者警告您只有OpenGL 2.1支持。后者意味着您将能够看到一些图形，但根据问题的类型，您将看到一些糟糕的图形。例如，在IntelGMA4500上，在夜间模式下只有一个小问题，而在其他系统上，我们有丢失行星的报告，甚至当行星进入视野时就崩溃。如果你看到这个，试着运行inDirect3D 9或者MESA模式，或者升级你的系统。该警告一旦被忽略，将不会再次显示。
2022年11月24日 09点11分
7
窗口
Stellarium安装程序会在程序/Stellarium部分的开始菜单中创建一个完整的项目列表。该列表会随着时间的推移而变化，并非此处列出的所有条目都会安装在您的系统上。选择其中一个来运行Stellarium:
Stellarium OpenGL版本。这对于现代电脑来说是最有效的，当你安装了合适的OpenGL驱动程序时应该使用。请注意，有些显卡被Qt“列入黑名单”以立即通过ANGLE (Direct3D)运行，在这种情况下，您不能强制使用OpenGL。这不应该打扰你。
Stellarium(角度模式)通过ANGLElibrary使用OpenGL渲染的Direct3D转换。强制Direct3D版本9。
Stellarium (MESA模式)通过MESA库使用软件渲染。这应该在没有专用显卡的anyPC上工作。
Stellarium (200%)在一些4k屏幕的系统上，Stellarium显得太小。这种联系迫使规模扩大。
如果由于某种原因，Stellarium的对话框和按钮显得太大，而您想缩小它们，请编辑链接并更改缩放参数。
启动时，会执行诊断检查，以测试图形硬件是否能够运行。如果一切正常，你将什么也看不见。否则，您可能会看到一个错误面板，通知您您的计算机无法运行Stellarium(“未找到OpenGL 2”)，或者警告您只有OpenGL 2.1支持。后者意味着您将能够看到一些图形，但根据问题的类型，您将看到一些糟糕的图形。例如，在IntelGMA4500上，在夜间模式下只有一个小问题，而在其他系统上，我们有丢失行星的报告，甚至当行星进入视野时就崩溃。如果你看到这个，试着运行inDirect3D 9或者MESA模式，或者升级你的系统。该警告一旦被忽略，将不会再次显示。
