CYCLECOMPUTERFUNCTIONS1.Current speed2.24HourCLOCK3.Total distance(ODO)4.Trip distance(DST)5.Maximum speed(MXS)6.Average Speed(AVS)7.Trip time(TM)8.Scan(SCAN)9.Auto Start/Stop10.Kilometer/Mile conversion11.Wheel Circumference Setting12.LCD Auto Clear

MAIN UNITS1.Liquid Crystal Display2.MODELbutton:Use to Select the functions3.SET Button:use to set the digit4.Battery case cover5.Cycle computer accessoriesMounting the cycle computer main unit bracketAttach the bracket on the handlebar by means of the screw provided,the enclosed rubber pad can be used if the handle bar shouldn’t provide the required thickness,Tighten the screw and make sure the braket is steady.

Mounting the sensor unit and magnetAttach the magnet to the spoke on the front wheel with the screw.Attach the sensor to the inner side of the front fork,Adjust their relative position,ensure that the magnet is directly at the bulge near the top of the sensor and the distance between them is less 5 mm.Tighten all cable clip and screw to make all parts stedy.Bicycle Wheel size(inch) 24’’Wheel circuference(mm)1940

Operation1.Setting wheel circumference,clock and metric or British unit.Use “MODE”Button to select which digit you what to change and Use “SET”button to set the digit.2.Dsplay speed and distance and timeThe upper line of the LCD is always for current speed and the second line is for other functions,use “MODE” to choose it,In SCAN function,the display will be auto-changed every 5 second.3.ResetPress “MODE” and “set”together,All records will be reset.

ImportantWheel circumference measuremcnts are shown in MM.Check the position of the sensor and magnet occasionally.Keep attention to the traffic and road condition

CYCLECOMPUTER FUNCTIONS 自行车测试表1. 速度2. 小时时钟3. 累积距离4. 单程距离 5. 最大速度 6. 平均速度7. 单程时间8. 自动扫描9. 自动启动/停止10. 公/英里转换 11. 轮周长设置12. 自动清屏

中文说明?我也要[email protected]