关于三星UFS4.0闪存的一些信息
固态硬盘吧
全部回复
仅看楼主
level 7
手机是IQOO11S 1T版本,知道采用了UFS4.0闪存,兴趣所致,做了些调查,汇报如下:
通过错误日志,可以提取到下述信息:
1、
ufsModel=KLUGGARHHD-B0G1
代表所用闪存型号为:KLUGGARHHD-B0G1
进一步信息,属于三星UFS4.0技术,官网可查
链接:https://semiconductor.samsung.com/us/estorage/ufs/ufs-4-0/kluggarhhd-b0g1/
2、
stlifeA=0x01
stLifeB=0x01
代表闪存的磨损情况。根据JESD B5.1 EMMC协议可查,0x01为0%-10% device life time used,意味着我手中的这部iqoo11S 1T的闪存健康度为100%-90%。
进一步信息,对照表如下:
Table 104- Device life time estimation type A value
Value Description
0x00 Not defined
0x01 0%-10% device life time used
0x02 10% -20% device life time used
0x03 20% -30% device life time used
0x04 30% - 40% device life time used
0x05 40%-50% device life time used
0x06 50%-60% device life time used
0x07 60%-70% device life time used
0x08 70%-80% device life time used
0x09 80% - 90% device life time used
0x0A 90%-100% device life time used
0x0B Exceeded its maximum estimated device life time
Others Reserved
3、
StorageManagerService: Storage lifetime: 10
结合0x01值,推断此处的存储寿命为“满”或已磨损10%
4、
StorageManagerService: Set smart idle maintenance: latest write amount: 2799, average write amount: 512, min segment threshold: 512, dirty reclaim rate: 0.5, segment reclaim weight: 2.0, period(min): 60, min gc sleep time(ms): 5000, target dirty ratio: 80
vold: Enough free segments: 380932
SmartStorageMaintIdler: Got smart storage maintenance service completion callback
上述信息详细分析如下(通过Grok):
系统配置了智能空闲维护参数,用于优化 UFS 存储的垃圾回收(GC)和数据管理:
latest write amount: 2799:最近写入量。
average write amount: 512:平均写入量。
min segment threshold: 512:触发 GC 的最小段阈值。
dirty reclaim rate: 0.5:脏数据回收比例为 50%。
segment reclaim weight: 2.0:段回收优先级权重。
period(min): 60:GC 周期为 60 分钟。
min gc sleep time(ms): 5000:GC 休眠时间为 5 秒。
target dirty ratio: 80:目标脏数据比例为 80%。
vold 报告有 380932 个空闲段,表明存储空间充足,无需立即执行 GC。
SmartStorageMaintIdler 回调表明完成了一次存储优化操作。
以上。供有意于此的iqoo11用户参考
2025年04月16日 06点04分 1
1