> [警告] SRM 分析包含无法计算材料.
> [警告] SRM 分析包含无法计算材料.
> [警告] SRM 分析包含无法计算材料.
> [警告] SRM 分析包含无法计算材料.
> 分析数据成功地传输到求解器.
> READING INPUT FILE [D:\Midas gts user file\NXGT5_3D边坡.mec]
> COMPLETED
>
> PERFORMING ANALYSIS TYPE=[SlopeStabilitySRMStd] LABEL=[边坡稳定(SRM)]
> - SETUP ANALYSIS
> MULTI-FRONTAL SOLVER (AUTO SELECTED)
> [PROBLEM INFO]
> NUMBER OF NODES : 76207
> NUMBER OF ELEMENTS : 72038
> NUMBER OF DOFS : 233031
> NUMBER OF EQUATIONS : 218793
> - RUN ANALYSIS
> INCREMENT= 1 (100.00%), ITERATION= 37, ERROR NORMS: P( 9.72E-004/ 1.0E-003) CONVERGED
> INCREMENT= 2 (100.00%), ITERATION= 16, ERROR NORMS: P( 9.53E-004/ 1.0E-003) CONVERGED
> INCREMENT= 3 (100.00%), ITERATION= 18, ERROR NORMS: P( 9.57E-004/ 1.0E-003) CONVERGED
> INCREMENT= 4 (100.00%), ITERATION= 23, ERROR NORMS: P( 9.61E-004/ 1.0E-003) CONVERGED
> INCREMENT= 5 (100.00%), ITERATION= 25, ERROR NORMS: P( 9.80E-004/ 1.0E-003) CONVERGED
> INCREMENT= 6 (100.00%), ITERATION= 28, ERROR NORMS: P( 9.81E-004/ 1.0E-003) CONVERGED
> INCREMENT= 7 (100.00%), ITERATION= 36, ERROR NORMS: P( 9.93E-004/ 1.0E-003) CONVERGED
> INCREMENT= 8 (100.00%), ITERATION= 49, ERROR NORMS: P( 1.10E-003/ 1.0E-003)
> MAXIMUM NUMBER OF ITERATIONS REACHED. BISECTING LOAD INCREMENT (BISECT LEVEL=1)
> INCREMENT= 8 (100.00%), ITERATION= 9, ERROR NORMS: P( 9.76E-004/ 1.0E-003) CONVERGED
> INCREMENT= 9 (100.00%), ITERATION= 18, ERROR NORMS: P( 9.88E-004/ 1.0E-003) CONVERGED
> INCREMENT= 10 (100.00%), ITERATION= 28, ERROR NORMS: P( 2.80E-003/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=1)
> INCREMENT= 10 (100.00%), ITERATION= 8, ERROR NORMS: P( 9.71E-004/ 1.0E-003) CONVERGED
> INCREMENT= 11 (100.00%), ITERATION= 4, ERROR NORMS: P( 5.70E-003/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=2)
> INCREMENT= 11 (100.00%), ITERATION= 4, ERROR NORMS: P( 9.13E-004/ 1.0E-003) CONVERGED
> INCREMENT= 12 (100.00%), ITERATION= 16, ERROR NORMS: P( 9.20E-004/ 1.0E-003) CONVERGED
> INCREMENT= 13 (100.00%), ITERATION= 11, ERROR NORMS: P( 1.24E-002/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=1)
> INCREMENT= 13 (100.00%), ITERATION= 38, ERROR NORMS: P( 1.32E-003/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=2)
> INCREMENT= 13 (100.00%), ITERATION= 12, ERROR NORMS: P( 9.95E-004/ 1.0E-003) CONVERGED
> INCREMENT= 14 (100.00%), ITERATION= 49, ERROR NORMS: P( 1.09E-003/ 1.0E-003)
> MAXIMUM NUMBER OF ITERATIONS REACHED. BISECTING LOAD INCREMENT (BISECT LEVEL=3)
> INCREMENT= 14 (100.00%), ITERATION= 3, ERROR NORMS: P( 9.90E-004/ 1.0E-003) CONVERGED
> INCREMENT= 15 (100.00%), ITERATION= 10, ERROR NORMS: P( 9.99E-004/ 1.0E-003) CONVERGED
> INCREMENT= 16 (100.00%), ITERATION= 23, ERROR NORMS: P( 3.65E-003/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=2)
> INCREMENT= 16 (100.00%), ITERATION= 26, ERROR NORMS: P( 1.05E-003/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=3)
> INCREMENT= 16 (100.00%), ITERATION= 10, ERROR NORMS: P( 9.79E-004/ 1.0E-003) CONVERGED
> INCREMENT= 17 (100.00%), ITERATION= 23, ERROR NORMS: P( 9.98E-004/ 1.0E-003) CONVERGED
> INCREMENT= 18 (100.00%), ITERATION= 32, ERROR NORMS: P( 1.97E-003/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=3)
> INCREMENT= 18 (100.00%), ITERATION= 12, ERROR NORMS: P( 9.98E-004/ 1.0E-003) CONVERGED
> INCREMENT= 19 (100.00%), ITERATION= 37, ERROR NORMS: P( 9.88E-004/ 1.0E-003) CONVERGED
> INCREMENT= 20 (100.00%), ITERATION= 23, ERROR NORMS: P( 1.03E-002/ 1.0E-003)
> CONVERGENCE NOT LIKELY. BISECTING LOAD INCREMENT (BISECT LEVEL=1)
> INCREMENT= 20 (100.00%), ITERATION= 1, ERROR NORMS: P( 1.48E-002/ 1.0E-003)

什么问题呀

srm只要时间够长总是能收敛的，它是以数值计算的不收敛性作为结束计算的条件。如果希望快点收敛，要么用高性能工作站算，要么减少网格。你这里面七万个单元，减到两万内就很快了。

这没毛病

[警告] SRM 分析包含无法计算材料.这个问题 楼主你后来怎么解决的还记得吗？

你还可以继续算

请问荷载里面的收缩选项，里面有收缩，收缩inc，参考深度这个分别指的是什么