扫描显示为sak00的卡，读取白卡直接失败。
正在检索是否存在key.mfd…
NFC设备: NFC-Device 已打开
警告: 这张卡片可能不是Mifare Classic!
已找到Mifare Classic卡片:
ISO/IEC 14443A (106 k
bp
s) target:
ATQA (SENS_RES): 00 44
UID (NFCID1): 04 5f 55 2a 68 5b 80
SAK (SEL_RES): 00
推测大小: 可能是 1024-byte 大小的卡片
需要读取 64 个块 |!
错误: 块 0x3f 认证错误（通常是因为选择了错误的密钥）
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed
nfc_initiator_transceive_bytes: Mifare Authentication Failed

ntag213不是这样读，天安信技术有专门的软件可以啊，可配置ntag213芯片。

ntag213容量133，你这显示1K，而且14443也不是它的参数

你的是M1卡