摘抄自https://forum.百xda-developers.度com/showpost有.php?p=75946587毒&postcount=43
How to make backup and restore of phone partitions
如何进行电话分区的备份和恢复
WORKS ON SAT AND SS2 models
在SAT和SS2模型
backups:
备份：
modemst1
modemst2
rf_nv
securefs
deviceinfo
fsg
fsc
SS2 private partitions backup ver 999.9
SS2私人分区备份版本999.9
1. Switch to EDL mode:
1。EDL模式开关：
For model SS2 flash service loader before (Visit first page -bootloader unlock till Step 6):
关于SS2模型闪存服务加载程序之前
Enter: fastboot oem reboot-edl
输入: fastboot oem reboot-edl
For model SAT: use Methode1 or 2
SAT模型:使用模式1或2
2. Install Qualcomm HS-USB 9008 driver (comes together with OST if you don't have installed)
2。高通hs-usb 9008驱动程序安装
（如果你没有安装的话，可以和OST一起安装）
3. Change com port number of Qualcomm HS-USB 9008 driver in file
params.cmd.
3。在params.cmd文件中更改高通hs-usb 9008驱动的COM端口号
Open file in text editor.
用文本编辑器打开文件。
set SaharaComPort=com...[number of com port]
set SaharaComPort=com...[COM端口数字]如：set SaharaComPort=com16
change path of prog_..file in
改变prog_ ..文件路径
set FirehoseFile=[full path to programmer]
set FirehoseFile=[完整的文件路径]如：set FirehoseFile=C:\Infocus\nokia\qpst_personal\prog_emmc_ufs_firehose_Sdm660_ddr.elf
Save changes.
保存更改。
4. Start readselparts.bat
4。启动readselparts.bat
Write back?
回写呢？
Start writeselparts.bat
启动writeselparts.bat
Note: script is written by someone
注意：脚本是由某人编写的。