12月这次固件更新问题太多了，有的人更新失败导致基站红灯，有的基站死机，有的手柄和头盔跳动漂移，以下分享一下恢复基站固件的方法

首先是STEAM论坛原文：
I am sorry to hear some people are experiencing upgrade problems. The latest firmware is an important update, it fixes a nasty configuration corruption bug in previous versions (older than 220) which can leave bases with subtle problems that go unnoticed. These upgrade issues are generally the result of this bug and this fix can correct the corruption and upgrade a base to the latest version so the problem will not recur. The problem does not occur in mass-production or VDK1 bases, only PRE and some PVT units are affected.
The fix has worked successfully for several users, so we shipped the required files in the latest beta. You can find the files under your SteamVR install directory. The easiest way to get there is to right click on SteamVR in Steam, select Properties, click on the Local Files tab and Browse Local Files... Once there the firmware files live in:
tools\lighthouse\firmware\lighthouse_tx\archive\htc_2.0
You will need two files:
* lighthouse_tx_htc_2_0-calibration-rescue-244.bin
* lighthouse_tx_htc_2_0-244-2016-03-12.bin
WARNING: You should not attempt this fix unless your base stations are really broken. While it *should* be harmless, there is a non-zero chance it could make things worse. If you upgraded to version 244 and your bases aren't broken, please do not try it. This fix also applies only to HTC base stations, it will not work with older VDK1/Robin or the red laser Batman units.
The procedure is much like upgrading manually, but you do it twice, once with the fix-up firmware which will try to fix the base station, then once it has completed the fix, again with the current latest firmware.
1. With the base station unpowered, connect via a micro-B USB cable to your PC.
2. Hold the mode button down and plug in the power lead.
3. You can release the button once it enumerates as a USB mass storage device.
4. The drive will be called “CRP_DISABLED” and contain one file “firmware.bin”, delete that file.
5. Copy over onto the drive the “lighthouse_tx_htc_2_0-calibration-rescue-244.bin” file.
6. Once the copy is complete, pull out the power lead.
7. Wait a few seconds then plug in the power again. Be sure not to press the mode button while powering it up this time.
8. In a couple of seconds it should rapidly flash green or red. Green means it succeeded.
9. If it is flashing red that means it couldn’t automatically fix it and I’ll need to look at the unit to work out why.
10. Unplug the power again.
11. Repeat steps 1 thru 7 but using the “lighthouse_tx_htc_2_0-244-2016-03-12.bin” firmware file instead of the rescue one.
12. The base should now be working again, confirm by setting its mode to "A" and tracking with it alone (the other base turned off). Once it is confirmed working you can add back the other base.
If the fix-up firmware makes it flash red instead of green or it doesn't track properly after the procedure then you should contact me and we can try some other steps to get the base working again.

谢谢楼主分享知识

顺带说一句，光学连接模式需要把基站设置为一个B，一个C。

无敌啊，修好喽！！！

我就把firmware.bin删了，把
lighthouse_tx_htc_2_0-436-2016-09-20.bin复制进去就好了Y(^o^)Y

大神们好，我把定位器修复成功后，提示更新了，再次更新，之后还是照样闪红灯，怎么处理呢

请问大家是用SteamVR国际板吗？ SteamVR中国版BS固件并没有更新怎么大家会收到更新通知啊？

回复过后一直闪绿灯怎么办啊

我插入电脑后提示我要格式化 怎么办 就算我点格式也会说格式化失败

大家确认按这法子显示正常后，基站工作工常？

PC玩家真的好厉害，我就是电脑水平垃圾才转向主机的，真希望vive设置傻瓜化，即插即用，不要莫名其少女的各种报错。HTC干巴爹！

我还没有，更新过固件，现在，一直正常使用！我在考虑要不要更新，只要能用不更新，这个思路对吗？？

安装好蓝牙驱动，无线升级一切正常

挖个坟，按照楼主的方法，灯是变绿了，也没有报错了。但是检测不到头显。怎么破。其他几个版本都试了，都会出现红灯报错。