<?xml version="1.0" encoding="UTF-8"?>
<policy name = "generic"
schema_ver = "1"
policy_ver = "24.1.7"
>
<initial>
<actions>
<!-- Define the MCCs in which FDD LTE is to be disabled -->
<mcc_list name="home_mccs">
460
</mcc_list>
<!-- These are the IMSI PLMNs of Chinese operators that are *not*
restricted
-->
<plmn_list name = "unrestricted_operators">
460-00 460-02 460-07 460-08
</plmn_list>
<!-- Define the noservice timer with a 1 minute interval -->
<!-- NOTE: Proper functioning of this policy requires that there
be a timer named "noservice". Do NOT rename this timer.
-->
<define_timer name = "noservice" interval = "1" units = "min" />
<!-- No LTE FDD bands list -->
<rf_band_list name="no_fdd_lte">
<gw_bands base="hardware" />
<!-- LTE Band: 38, 39, 40, 41, 42, 43 are mapped to Band Bits: 37, 38, 39, 40, 41, 42
respectively.
Refer: sys_sband_lte_e_type in sys.h
-->
<lte_bands base="none" >
<include> 37 38 39 40 </include>
</lte_bands>
<tds_bands base="hardware" />
</rf_band_list>
<!-- All RF bands list -->
<rf_band_list name="all_but_tds">
<gw_bands base="hardware" />
<lte_bands base="hardware" />
<tds_bands base="none" />
</rf_band_list>
<!-- GSM only bands list -->
<rf_band_list name="gsm_only">
<gw_bands base="hardware" />
<lte_bands base="none" />
<tds_bands base="none" />
</rf_band_list>
<!-- All bands list -->
<rf_band_list name="rf_bands_all">
<gw_bands base="hardware" />
<lte_bands base="hardware" />
<tds_bands base="hardware" />
</rf_band_list>
<!-- Configure the device as GWTL DSDS if not already configured -->
<device_configuration num_sims="2" max_active="1">
<config>
<subs id="1">
<rat_capability base="none">
<include> GSM WCDMA TDSCDMA LTE </include>
</rat_capability>
</subs>
<subs id="2">
<rat_capability base="none">
<include> GSM </include>
</rat_capability>
</subs>
</config>
<config>
<subs id="1">
<rat_capability base="none">
<include> GSM </include>
</rat_capability>
</subs>
<subs id="2">
<rat_capability base="none">
<include> GSM WCDMA TDSCDMA LTE </include>
</rat_capability>
</subs>
</config>
</device_configuration>
<boolean_define name="home" initial="true" />
<!-- Set initial RAT Capability and RF bands -->
<rat_capability_if subs="1" base="none">
<include> GSM TDSCDMA LTE </include>
</rat_capability_if>
<rf_bands_if subs="1" list="no_fdd_lte" />
<rat_capability_if subs="2" base="none">
<include> GSM </include>
</rat_capability_if>
<rf_bands_if subs="2" list="gsm_only" />
</actions>
</initial>
<!--
====================================================================
Rules to handle noservice situations.
====================================================================
-->
<!-- RULE #1 -->
<!-- Chinese operators not in "unrestricted_operators" on mmode subs only get to use GSM -->
<rule precond="IMSI">
<conditions>
<is_subs_mmode subs="1" />
<imsi_mcc_in subs="1" list="home_mccs" />
<not> <imsi_plmn_in subs="1" list = "unrestricted_operators" /> </not>
</conditions>
<actions>
<rat_capability subs="1" base = "none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="1" list="gsm_only" />
<svc_mode subs="1"> FULL </svc_mode>
<rat_capability subs="2" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="2" list="gsm_only" />
<svc_mode subs="2"> FULL </svc_mode>
</actions>
</rule>
<!-- RULE #2 -->
<!-- Chinese operators not in "unrestricted_operators" on mmode subs only get to use GSM -->
<rule precond="IMSI">
<conditions>
<is_subs_mmode subs="2" />
<imsi_mcc_in subs="2" list="home_mccs" />
<not> <imsi_plmn_in subs="2" list = "unrestricted_operators" /> </not>
</conditions>
<actions>
<rat_capability subs="2" base = "none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="2" list="gsm_only" />
<svc_mode subs="2"> FULL </svc_mode>
<rat_capability subs="1" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="1" list="gsm_only" />
<svc_mode subs="1"> FULL </svc_mode>
</actions>
</rule>
<!-- RULE #3 -->
<!-- If noservice timer expired and we dont have service on any sub then move SUBS1 to Full RAT mode -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
<is_subs_mmode subs="1" />
<service_status_in subs="non-mmode"> OOS POWER_SAVE </service_status_in>
</conditions>
<actions>
<expired_timer_handled name="noservice" />
<svc_mode subs="1"> LIMITED </svc_mode>
<rat_capability subs="1" base="config" />
<rf_bands subs="1" list = "rf_bands_all" />
<timer_start name="noservice" />
</actions>
</rule>
<!-- RULE #4 -->
<!-- If noservice timer expired and we dont have service on any sub then move SUBS2 to Full RAT mode -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
<is_subs_mmode subs="2" />
<service_status_in subs="non-mmode"> OOS POWER_SAVE </service_status_in>
</conditions>
<actions>
<expired_timer_handled name="noservice" />
<svc_mode subs="2"> LIMITED </svc_mode>
<rat_capability subs="2" base="config" />
<rf_bands subs="2" list = "rf_bands_all" />
<timer_start name="noservice" />
</actions>
</rule>
<!-- RULE #5 -->
<!-- If noservice timer expired then set boolean home based on MCC -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
</conditions>
<actions>
<boolean_set name="home">
<any_of>
<all_of>
<not> <service_status_in subs="mmode"> OOS POWER_SAVE </service_status_in> </not>
<serving_mcc_in subs="mmode" list="home_mccs" />
</all_of>
<all_of>
<not> <service_status_in subs="non-mmode"> OOS POWER_SAVE </service_status_in> </not>
<serving_mcc_in subs="non-mmode" list="home_mccs" />
</all_of>
</any_of>
</boolean_set>
<continue />
</actions>
</rule>
<!-- RULE #6 -->
<!-- If noservice timer expired and SUBS1 is mmode and non-multimode sub has HOME service
-- then move config to home config -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
<is_subs_mmode subs="1" />
<boolean_test name="home" />
</conditions>
<actions>
<expired_timer_handled name="noservice" />
<rat_capability subs="1" base="config">
<exclude> WCDMA </exclude>
</rat_capability>
<rf_bands subs="1" list="no_fdd_lte" />
<svc_mode subs="1"> FULL </svc_mode>
<rat_capability subs="2" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="2" list="rf_bands_gsm" />
<svc_mode subs="2"> FULL </svc_mode>
<continue />
</actions>
</rule>
<!-- RULE #7 -->
<!-- If noservice timer expired and SUBS1 is mmode and non-multimode sub has ROAM service
-- then move config to Roam config -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
<is_subs_mmode subs="1" />
<not> <boolean_test name="home" /> </not>
</conditions>
<actions>
<expired_timer_handled name="noservice" />
<rat_capability subs="1" base="config">
<exclude> TDSCDMA </exclude>
</rat_capability>
<rf_bands subs="1" list="all_but_tds" />
<svc_mode subs="1"> FULL </svc_mode>
<rat_capability subs="2" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="2" list="rf_bands_gsm" />
<svc_mode subs="2"> FULL </svc_mode>
<continue />
</actions>
</rule>
<!-- RULE #8 -->
<!-- If noservice timer expired and SUBS2 is mmode and non-multimode sub has HOME service
-- then move config to home config -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
<is_subs_mmode subs="2" />
<boolean_test name="home" />
</conditions>
<actions>
<expired_timer_handled name="noservice" />
<rat_capability subs="2" base="config">
<exclude> WCDMA </exclude>
</rat_capability>
<rf_bands subs="2" list="no_fdd_lte" />
<svc_mode subs="2"> FULL </svc_mode>
<rat_capability subs="1" base = "none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="1" list="rf_bands_gsm" />
<svc_mode subs="1"> FULL </svc_mode>
<continue />
</actions>
</rule>
<!-- RULE #9 -->
<!-- If noservice timer expired and SUBS2 is mmode and non-multimode sub has ROAM service
-- then move config to Roam config -->
<rule precond="none">
<conditions>
<timer_expired name="noservice" />
<is_subs_mmode subs="2" />
<not> <boolean_test name="home" /> </not>
</conditions>
<actions>
<expired_timer_handled name="noservice" />
<rat_capability subs="2" base="config">
<exclude> TDSCDMA </exclude>
</rat_capability>
<rf_bands subs="2" list="all_but_tds" />
<svc_mode subs="2"> FULL </svc_mode>
<rat_capability subs="1" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="1" list="rf_bands_gsm" />
<svc_mode subs="1"> FULL </svc_mode>
<continue />
</actions>
</rule>
<!-- RULE #10 -->
<!-- If we are ONLINE have noservice on multimode SUBS then then start timer and stay in same configuration -->
<rule precond="none">
<conditions>
<phone_operating_mode> ONLINE </phone_operating_mode>
<not> <service_status_in subs="mmode"> FULL LIMITED LIMITED-REGIONAL </service_status_in> </not>
</conditions>
<actions>
<timer_start name="noservice" />
</actions>
</rule>
<!-- RULE #11 -->
<!-- Stop timer: we are here because mmode SUBS has service -->
<rule precond="SS">
<conditions>
<service_status_in subs="mmode"> FULL LIMITED LIMITED-REGIONAL </service_status_in>
</conditions>
<actions>
<timer_stop name="noservice" />
<svc_mode subs="1"> FULL </svc_mode>
<svc_mode subs="2"> FULL </svc_mode>
<continue />
</actions>
</rule>
<!--
===========================================================================
Rules if subs1 is the MMODE subs.
===========================================================================
-->
<!-- RULE #12 -->
<!-- If operating in China, exclude FDD LTE bands,exclude WCDMA -->
<rule>
<conditions>
<is_subs_mmode subs="1" />
<serving_mcc_in subs="mmode" list="home_mccs" />
</conditions>
<actions>
<rat_capability subs="1" base="config">
<exclude> WCDMA </exclude>
</rat_capability>
<rf_bands subs="1" list="no_fdd_lte" />
<rat_capability subs="2" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="2" list="gsm_only" />
</actions>
</rule>
<!-- RULE #13 -->
<!-- If not in China, allow all bands, exclude TDSCDMA -->
<rule>
<conditions>
<is_subs_mmode subs="1" />
</conditions>
<actions>
<rat_capability subs="1" base="config">
<exclude> TDSCDMA </exclude>
</rat_capability>
<rf_bands subs="1" list="all_but_tds" />
<rat_capability subs="2" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="2" list="gsm_only" />
</actions>
</rule>
<!--
===========================================================================
Rules if subs2 is the MMODE subs.
===========================================================================
-->
<!-- RULE #14 -->
<!-- If operating in China, exclude FDD LTE bands -->
<rule>
<conditions>
<is_subs_mmode subs="2" />
<serving_mcc_in subs="mmode" list="home_mccs" />
</conditions>
<actions>
<rat_capability subs="2" base="config">
<exclude> WCDMA </exclude>
</rat_capability>
<rf_bands subs="2" list="no_fdd_lte" />
<rat_capability subs="1" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="1" list="gsm_only" />
</actions>
</rule>
<!-- RULE #15 -->
<!-- If not in China, allow all bands -->
<rule>
<conditions>
<is_subs_mmode subs="2" />
</conditions>
<actions>
<rat_capability subs="2" base="config">
<exclude> TDSCDMA </exclude>
</rat_capability>
<rf_bands subs="2" list="all_but_tds" />
<rat_capability subs="1" base="none">
<include> GSM </include>
</rat_capability>
<rf_bands subs="1" list="gsm_only" />
</actions>
</rule>
</policy>

不是己经有了破解的吗，那个替换的文件应该就是己经改过的吗

有破解电信的方法吗

在哪个文件夹提取的

发哪个文件夹的名称来看看

看到回复一下

楼主,求破解需要的资源包

接下来自己理解吧