ArpTimeoutCheck
Using Eth0 (10/100-M) device
TFTP from server 192.168.1.15; our IP address is 192.168.1.10
Filename 'openwrt-ramips-rt305x-mpr-a2-squashfs-sysupgrade.bin'.
TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: *
ArpTimeoutCheck
T T T T T T T T T T
Retry count exceeded; starting again
Trying Eth0 (10/100-M)
ETH_STATE_ACTIVE!!
ArpTimeoutCheck
ArpTimeoutCheck
Using Eth0 (10/100-M) device
TFTP from server 192.168.1.15; our IP address is 192.168.1.10
Filename 'openwrt-ramips-rt305x-mpr-a2-squashfs-sysupgrade.bin'.
TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: *
ArpTimeoutCheck
T T T T T T T T T T
Retry count exceeded; starting again
Trying Eth0 (10/100-M)
ETH_STATE_ACTIVE!!
ArpTimeoutCheck
ArpTimeoutCheck
Using Eth0 (10/100-M) device
TFTP from server 192.168.1.15; our IP address is 192.168.1.10
Filename 'openwrt-ramips-rt305x-mpr-a2-squashfs-sysupgrade.bin'.
TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: *
ArpTimeoutCheck
T T T T T T T T T
按照教程没有出错啊，板子与电脑连的是同一路由器，也开了tftpd32工具，怎么就是烧不进去啊？？？

难道路由器必须处于连接外网的状态下才行吗？我用的路由器没有连接外网，跟这个有关系吗？

同求，我也有个rt5350的板子 只有wan口没有lan口 内存也小 也想刷op

我的 酷翼a2 硬改改死了

IP地址设置可能不正确