使用
lsp
ci -v命令查看网卡信息如下：
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
Flags: fast devsel, IRQ 18
I/O ports at e000 [size=256]
Memory at f0004000 (64-bit, prefetchable) [size=4K]
Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 1c-00-00-00-68-4c-e0-00
Kernel modules: r8169
然后在百度上找到可个网卡驱动的下载包 r8168-8.039.00.tar.bz2 ，解压进去后有一个autorun.sh。
运行这个之后报出错误如下：
[root@1 r8168-8.039.00]# ./autorun.sh
Check old driver and unload it.
Build the module and install
make: *** /lib/modules/3.17.4-200.fc20.x86_64/build: 没有那个文件或目录。 停止。
make[1]: *** [clean] 错误 2
make: *** [clean] 错误 2
请问，这是啥情况，之前使用ubuntu都是现成的驱动。。
内核版本信息：
Linux 1 3.17.4-200.fc20.x86_64 #1 SMP Fri Nov 21 23:26:41 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

lspci 列出的不是无线网卡， linux 内核已经识别到该网卡 (Kernel modules: r8169).

已经将 r8168-8.039.00.tar.bz2 的驱动安装了，但是wifi还是没有启动。lspci ～v信息如下：
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at e000 [size=256]
Memory at f0004000 (64-bit, prefetchable) [size=4K]
Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8168
iwconfig还是没有扫描到WiFi的端口