level 1
流星Achilles
楼主
1.程序烧到FLASH里面以后，不能再烧写。
failure resetting target to perform the flash operation
2.再通过仿真器下载程序到RAM，也总出现不能复位，或者复位后进不了主函数，就算偶尔能进主函数，程序运行也有问题。
Can*t Run Target CPU: Error 0x00000020/-1150 Error during: Execution, JTAG protocol reset.
Power Failure on Target CPU: Error 0x00001020/-1145 Error during: Execution, Target, Unrecoverable emulation error
Failed to remove the debug state from the target before disconnecting. There may still be breakpoint opcodes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging.
Failed Software Reset: Error 0x00000020/-1150 Error during: Execution, JTAG protocol reset.
Trouble Removing Breakpoint with the Action "Terminate GEL_Go()" at 0x9b84: Error 0x00000008/-1076 Error during: Break Point, Cannot set/verify breakpoint at 0x00009B84
2014年08月19日 08点08分
1
failure resetting target to perform the flash operation
2.再通过仿真器下载程序到RAM，也总出现不能复位，或者复位后进不了主函数，就算偶尔能进主函数，程序运行也有问题。
Can*t Run Target CPU: Error 0x00000020/-1150 Error during: Execution, JTAG protocol reset.
Power Failure on Target CPU: Error 0x00001020/-1145 Error during: Execution, Target, Unrecoverable emulation error
Failed to remove the debug state from the target before disconnecting. There may still be breakpoint opcodes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging.
Failed Software Reset: Error 0x00000020/-1150 Error during: Execution, JTAG protocol reset.
Trouble Removing Breakpoint with the Action "Terminate GEL_Go()" at 0x9b84: Error 0x00000008/-1076 Error during: Break Point, Cannot set/verify breakpoint at 0x00009B84
