买了水星MW310R V2 16M 64M ar9341 刷了OPENWRT固件 但无法识别出外置网卡3070.驱动已装

求解决方法 或谁有这个路由的可外挂网卡3070的OPENWRT固件 谢谢 [email protected]

插多几次

估计是驱动问题，增加相应的驱动程序就好了，想DIY可以重新编译增加相应的选项搞定搞定，嫌麻烦可以通过web界面添加。

你说的是这些吗
kmod-ath 3.3.8+2014-01-23.1-1
移除 kmod-ath9k 3.3.8+2014-01-23.1-1
移除 kmod-ath9k-common 3.3.8+2014-01-23.1-1
移除 kmod-cfg80211 3.3.8+2014-01-23.1-1
移除 kmod-crypto-aes 3.3.8-1
移除 kmod-crypto-arc4 3.3.8-1
移除 kmod-crypto-core 3.3.8-1
移除 kmod-crypto-des 3.3.8-1
移除 kmod-crypto-ecb 3.3.8-1
移除 kmod-crypto-hash 3.3.8-1
移除 kmod-crypto-hmac 3.3.8-1
移除 kmod-crypto-manager 3.3.8-1
移除 kmod-crypto-md4 3.3.8-1
移除 kmod-crypto-md5 3.3.8-1
移除 kmod-crypto-sha1 3.3.8-1
移除 kmod-ebtables 3.3.8-1
移除 kmod-eeprom-93cx6 3.3.8-1
移除 kmod-fs-cifs 3.3.8-1
移除 kmod-fs-ext4 3.3.8-1
移除 kmod-fs-ntfs 3.3.8-1
移除 kmod-fs-vfat 3.3.8-1
移除 kmod-fuse 3.3.8-1
移除 kmod-gpio-button-hotplug 3.3.8-1
移除 kmod-gre 3.3.8-1
移除 kmod-i2c-core 3.3.8-1
移除 kmod-input-core 3.3.8-1
移除 kmod-ip6tables 3.3.8-1
移除 kmod-ipt-bandwidth 3.3.8-1
移除 kmod-ipt-conntrack 3.3.8-1
移除 kmod-ipt-conntrack-extra 3.3.8-1
移除 kmod-ipt-core 3.3.8-1
移除 kmod-ipt-extra 3.3.8-1
移除 kmod-ipt-filter 3.3.8-1
移除 kmod-ipt-imq 3.3.8-1
移除 kmod-ipt-ipopt 3.3.8-1
移除 kmod-ipt-iprange 3.3.8-1
移除 kmod-ipt-nat 3.3.8-1
移除 kmod-ipt-nat-extra 3.3.8-1
移除 kmod-ipt-nathelper 3.3.8-1
移除 kmod-ipt-nathelper-extra 3.3.8-1
移除 kmod-ipt-timerange 3.3.8-1
移除 kmod-ipt-weburl 3.3.8-1
移除 kmod-iptunnel4 3.3.8-1
移除 kmod-ipv6 3.3.8-1
移除 kmod-l2tp 3.3.8-1
移除 kmod-leds-gpio 3.3.8-1
移除 kmod-ledtrig-default-on 3.3.8-1
移除 kmod-ledtrig-heartbeat 3.3.8-1
移除 kmod-ledtrig-netdev 3.3.8-1
移除 kmod-ledtrig-timer 3.3.8-1
移除 kmod-ledtrig-usbdev 3.3.8-1
移除 kmod-lib-crc-ccitt 3.3.8-1
移除 kmod-lib-crc-itu-t 3.3.8-1
移除 kmod-lib-crc16 3.3.8-1
移除 kmod-lib-textsearch 3.3.8-1
移除 kmod-mac80211 3.3.8+2014-01-23.1-1
移除 kmod-macvlan 3.3.8-1
移除 kmod-madwifi 3.3.8+r3314-6
移除 kmod-mppe 3.3.8-1
移除 kmod-net-zd1201 3.3.8-1
移除 kmod-nls-base 3.3.8-1
移除 kmod-nls-cp437 3.3.8-1
移除 kmod-nls-iso8859-1 3.3.8-1
移除 kmod-nls-utf8 3.3.8-1
移除 kmod-ppp 3.3.8-1
移除 kmod-pppoe 3.3.8-1
移除 kmod-pppol2tp 3.3.8-1
移除 kmod-pppox 3.3.8-1
移除 kmod-pptp 3.3.8-1
移除 kmod-rt2800-lib 3.3.8+2014-01-23.1-1
移除 kmod-rt2800-usb 3.3.8+2014-01-23.1-1
移除 kmod-rt2x00-lib 3.3.8+2014-01-23.1-1
移除 kmod-rt2x00-usb 3.3.8+2014-01-23.1-1
移除 kmod-rt73-usb 3.3.8+2014-01-23.1-1
移除 kmod-rtl8187 3.3.8+2014-01-23.1-1
移除 kmod-sched 3.3.8-1
移除 kmod-sched-core 3.3.8-1
移除 kmod-scsi-core 3.3.8-1
移除 kmod-sit 3.3.8-1
移除 kmod-sound-core 3.3.8-1
移除 kmod-tun 3.3.8-1
移除 kmod-usb-core 3.3.8-1
移除 kmod-usb-ohci 3.3.8-1
移除 kmod-usb-printer 3.3.8-1
移除 kmod-usb-serial 3.3.8-1
移除 kmod-usb-serial-pl2303 3.3.8-1
移除 kmod-usb-storage 3.3.8-1
移除 kmod-usb-storage-extras 3.3.8-1
移除 kmod-usb2 3.3.8-1
移除 kmod-video-core 3.3.8-1
移除 kmod-video-uvc 3.3.8-1
移除 kmod-video-videobuf2 3.3.8-1
移除 kmod-wdt-ath79 3.3.8-1
移除 kmod-zd1211rw 3.3.8+2014-01-23.1-1

login as: root
[email protected]'s password:
BusyBox v1.19.4 (2014-04-22 13:15:08 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
## #### ## ## ######## #######
## ## ## ## ## ## ##
## ## ## ## ## ## ##
## ## ## ## ###### ####### #######
## ## ## ## ## ## ##
## ## ## ## ## ## ##
######## #### ### ######## #######
-----------------------------------------------------
Openwrt-12.09.1 (Attitude Adjustment)
-----------------------------------------------------
root@OpenRouter:~# dmesg
[ 0.000000] Linux version 3.3.8 (xlive@xlive-machine) (gcc version 4.6.3 2012 0201 (prerelease) (Linaro GCC 4.6-2012.02) ) #12 Tue Apr 22 19:41:31 CST 2014
[ 0.000000] MyLoader: sysp=144f072e, boardp=b3b87878, parts=4ce2dc67
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9341 rev 3
[ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.00 0MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802de500, node_mem_map 8100000 0
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 16256
[ 0.000000] Kernel command line: board=TL-WR841N-v8 console=ttyS0,115200 roo tfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61564k/65536k available (2144k kernel code, 3972k reserve d, 410k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, No des=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
[ 0.100000] MIPS: machine is TP-LINK TL-WR841N/ND v8
[ 0.510000] bio: create slab <bio-0> at 0
[ 0.520000] Switching to clocksource MIPS
[ 0.530000] NET: Registered protocol family 2
[ 0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.530000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.540000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.540000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.550000] TCP reno registered
[ 0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.560000] NET: Registered protocol family 1
[ 0.570000] PCI: CLS 0 bytes, default 32
[ 0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.590000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY ) (c) 2001-2006 Red Hat, Inc.
[ 0.600000] msgmni has been set to 120
[ 0.600000] io scheduler noop registered
[ 0.610000] io scheduler deadline registered (default)
[ 0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.640000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.650000] console [ttyS0] enabled, bootconsole disabled
[ 0.660000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.670000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.670000] 5 tp-link partitions found on MTD device spi0.0
[ 0.680000] Creating 5 MTD partitions on "spi0.0":
[ 0.680000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.690000] 0x000000020000-0x000000104438 : "kernel"

[ 0.700000] mtd: partition "kernel" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only
[ 0.710000] 0x000000104438-0x000000ff0000 : "rootfs"
[ 0.720000] mtd: partition "rootfs" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only
[ 0.730000] mtd: partition "rootfs" set to be root filesystem
[ 0.740000] mtd: partition "rootfs_data" created automatically, ofs=B30000, l en=4C0000
[ 0.740000] 0x000000b30000-0x000000ff0000 : "rootfs_data"
[ 0.750000] 0x000000ff0000-0x000001000000 : "art"
[ 0.760000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.780000] ag71xx_mdio: probed
[ 0.790000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 1.340000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid= 004dd042, driver=Generic PHY]
[ 1.360000] eth1: Atheros AG71xx at 0xba000000, irq 5
[ 1.910000] eth1: Found an AR934X built-in switch
[ 2.950000] TCP cubic registered
[ 2.950000] NET: Registered protocol family 17
[ 2.950000] Bridge firewalling registered
[ 2.960000] 8021q: 802.1Q VLAN Support v1.8
[ 2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.980000] Freeing unused kernel memory: 212k freed
[ 5.260000] Registered led device: tp-link:green:lan1
[ 5.260000] Registered led device: tp-link:green:lan2
[ 5.260000] Registered led device: tp-link:green:lan3
[ 5.260000] Registered led device: tp-link:green:lan4
[ 5.260000] Registered led device: tp-link:green:qss
[ 5.260000] Registered led device: tp-link:green:system
[ 5.260000] Registered led device: tp-link:green:wan
[ 5.260000] Registered led device: tp-link:green:wlan
[ 8.570000] JFFS2 notice: (416) jffs2_build_xattr_subsystem: complete buildin g xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 30 of xref (0 dead, 6 orphan) found.
[ 9.420000] SCSI subsystem initialized
[ 9.570000] usbcore: registered new interface driver usbfs
[ 9.570000] usbcore: registered new interface driver hub
[ 9.580000] usbcore: registered new device driver usb
[ 10.150000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.160000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 10.170000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 10.210000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 10.230000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 10.230000] hub 1-0:1.0: USB hub found
[ 10.240000] hub 1-0:1.0: 1 port detected
[ 10.330000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.430000] Initializing USB Mass Storage driver...
[ 10.440000] usbcore: registered new interface driver usb-storage
[ 10.440000] USB Mass Storage support registered.

[ 33.140000] Loading modules backported from Linux version master-2014-01-23-0 -g62c147d
[ 33.140000] Backport generated by backports.git backports-20140124-0-g1256d3e
[ 33.320000] cfg80211: Calling CRDA to update world regulatory domain
[ 33.320000] cfg80211: World regulatory domain updated:
[ 33.330000] cfg80211: DFS Master region: unset
[ 33.330000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 33.340000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 33.350000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 33.360000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm)
[ 33.360000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
[ 33.370000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 20 00 mBm)
[ 33.380000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 33.620000] NET: Registered protocol family 10
[ 34.770000] usbcore: registered new interface driver rt73usb
[ 34.870000] usbcore: registered new interface driver rtl8187
[ 34.910000] ath: EEPROM regdomain: 0x0
[ 34.910000] ath: EEPROM indicates default country code should be used
[ 34.910000] ath: doing EEPROM country->regdmn map search
[ 34.910000] ath: country maps to regdmn code: 0x3a
[ 34.910000] ath: Country alpha2 being used: US
[ 34.910000] ath: Regpair used: 0x3a
[ 34.920000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 34.930000] Registered led device: ath9k-phy0
[ 34.930000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[ 34.940000] cfg80211: Calling CRDA for country: US
[ 34.940000] cfg80211: Regulatory domain changed to country: US
[ 34.950000] cfg80211: DFS Master region: FCC
[ 34.950000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 34.960000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27 00 mBm)
[ 34.970000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 17 00 mBm)
[ 34.980000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
[ 34.980000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 24 00 mBm)
[ 34.990000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 24 00 mBm)
[ 35.000000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 30 00 mBm)
[ 35.010000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40 00 mBm)
[ 35.110000] usbcore: registered new interface driver rt2800usb
[ 35.490000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 35.920000] PPP generic driver version 2.4.2
[ 36.230000] tun: Universal TUN/TAP device driver, 1.6
[ 36.240000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 36.280000] PPP MPPE Compression module registered
[ 36.380000] L2TP core driver, V2.0
[ 36.400000] L2TP netlink interface
[ 36.510000] IPv6 over IPv4 tunneling driver
[ 36.610000] GRE over IPv4 demultiplexor driver
[ 36.640000] GRE over IPv4 tunneling driver
[ 36.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.100000] NET: Registered protocol family 24
[ 37.240000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
[ 37.610000] PPPoL2TP kernel driver, V2.0
[ 37.630000] PPTP driver version 0.8.5
[ 38.190000] xt_time: kernel timezone is -0000
[ 39.010000] Hooked IMQ after mangle on PREROUTING
[ 39.020000] Hooked IMQ after nat on POSTROUTING
[ 39.020000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[ 39.200000] Ebtables v2.0 registered
[ 39.620000] ip6_tables: (C) 2000-2006 Netfilter Core Team

[ 40.210000] ath_hal: module license 'Proprietary' taints kernel.
[ 40.210000] Disabling lock debugging due to kernel taint
[ 40.230000] ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF51 12, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
[ 40.470000] ath_pci: trunk
[ 40.480000] wlan: trunk
[ 40.480000] wlan: mac acl policy registered
[ 40.480000] ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
[ 40.490000] ath_rate_minstrel: look around rate set to 10%
[ 40.500000] ath_rate_minstrel: EWMA rolloff level set to 75%
[ 40.500000] ath_rate_minstrel: max segment size in the mrr set to 6000 us
[ 40.630000] i2c /dev entries driver
[ 40.730000] usbcore: registered new interface driver zd1201
[ 40.820000] usbcore: registered new interface driver usblp
[ 40.850000] usbcore: registered new interface driver usbserial
[ 40.860000] USB Serial support registered for generic
[ 40.860000] usbcore: registered new interface driver usbserial_generic
[ 40.870000] usbserial: USB Serial Driver core
[ 41.000000] usbcore: registered new interface driver ums-alauda
[ 41.030000] usbcore: registered new interface driver ums-cypress
[ 41.050000] usbcore: registered new interface driver ums-datafab
[ 41.080000] usbcore: registered new interface driver ums-freecom
[ 41.100000] usbcore: registered new interface driver ums-isd200
[ 41.130000] usbcore: registered new interface driver ums-jumpshot
[ 41.240000] usbcore: registered new interface driver ums-karma
[ 41.260000] usbcore: registered new interface driver ums-sddr09
[ 41.290000] usbcore: registered new interface driver ums-sddr55
[ 41.320000] usbcore: registered new interface driver ums-usbat
[ 41.430000] Linux video capture interface: v2.00
[ 41.610000] usbcore: registered new interface driver zd1211rw
[ 41.720000] USB Serial support registered for pl2303
[ 41.720000] usbcore: registered new interface driver pl2303
[ 41.730000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 41.900000] fuse init (API version 7.18)
[ 42.000000] usbcore: registered new interface driver uvcvideo
[ 42.000000] USB Video Class driver (1.1.1)
[ 50.150000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 50.150000] device eth1 entered promiscuous mode
[ 50.170000] ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 50.200000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.890000] eth1: link up (1000M
bp
s/Full duplex)
[ 50.890000] br-lan: port 1(eth1) entered forwarding state
[ 50.900000] br-lan: port 1(eth1) entered forwarding state
[ 50.900000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 50.930000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 52.900000] br-lan: port 1(eth1) entered forwarding state
[ 92.700000] eth1: link down
[ 92.700000] br-lan: port 1(eth1) entered disabled state
[ 2766.200000] eth1: link up (1000Mbps/Full duplex)
[ 2766.200000] br-lan: port 1(eth1) entered forwarding state
[ 2766.210000] br-lan: port 1(eth1) entered forwarding state
[ 2768.210000] br-lan: port 1(eth1) entered forwarding state
root@OpenRouter:~#

看启动信息有网卡注册成功的记录，你这系统没少装驱动啊，能用得了这么多？