我是一个新手,刚装了fedora7,装的时候默认的就是字符界面.装好后发现只能在文本模式下操作.startx也不行.请懂的朋友帮忙.感激不尽.我的电脑是acer Aspire 4520G,显示器是AUO(友达光电).14.0英寸 30cm*19cm.谢谢..

补充贴出xorg.conf如下:# Xorg configuration created by pyxf86configSection "ServerLayout"Identifier "Default Layout"Screen 0 "Screen0" 0 0InputDevice "Keyboard0" "CoreKeyboard"InputDevice "Synaptics" "CorePointer"EndSectionSection "InputDevice"Identifier "Keyboard0"Driver "kbd"Option "XkbModel" "pc105"Option "XkbLayout" "us"EndSectionSection "InputDevice"Identifier "Synaptics"Driver "synaptics"Option "Device" "/dev/input/mice"Option "Protocol" "auto-dev"Option "Emulate3Buttons" "yes"EndSectionSection "Device"Identifier "Videocard0"Driver "nv"EndSectionSection "Screen"Identifier "Screen0"Device "Videocard0"DefaultDepth 24SubSection "Display"Viewport 0 0Depth 24EndSubSectionEndSection谢谢...

system-config-display

Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 24改16SubSection "Display" Viewport 0 0 Depth 24 24改16EndSubSection EndSection 试试我以前就出现过改了就行了不知你有行不

用System-config-display还是不行,出现以下信息....Couldn't start X server on card 0Couldn't start X server with old config,trying with a fresh configuration.Couldn't start X server on card 0Error,failed to start X server.如果有新的进展我会继续跟贴~谢谢...

startx后有什么显示和提示？/var/log/下面有没有相应的记录？

startx后出现一屏幕的信息.等我看看记录,找到了会传上来.昨天试着安装nv的linux驱动,发现我的gcc好像没有装上.不能安装.呆会可能会重装一次完整版的...再试...

刚重装了f7,gcc可以运行了.也就装上了nv 的官方驱动.但重起并没有显示nv的logo,是我装的驱动不对??查资料...再试一下4楼的建议.

谢谢大家的帮助.刚刚再次搞坏.我把Selinux关了.启动不了,再装.可怜了我的电脑了.这次装F7吸取了前几次的教训,把搜来的n个贴.集中处理,选择可行的方法.终于搞定.原来很简单,前几次给想复杂了.装好Nv的驱动,它就会自动识别了.不过还是有一些问题,如:1,语言现在不能更改,更改后会让我重启.但结果还是英文.2,声卡没有驱动.3,显卡是驱好了,不过每次启动X都会自动将屏幕加亮.(吓我一跳!),现在只能手动调节.由于还没有写数据结构的实验预习,这些问题等我有时间我会陆续开新贴探讨的.谢谢楼上三位的热心帮助.从中我得到了很多启发.学会了一些东西.特此感谢.