哪位大神帮忙看看啊，这个错误是怎么回事啊？
Warning in BHC11 inst
ance 2
Chamber volume is limited by vol0 / 100 = 0.000000.
Warning in BHC11 instance 8
Chamber volume is limited by vol0 / 100 = 0.000000.
There have been 20 consecutive restarts.
The last 20 discontinuity messages were:
SHTL1 instance 3 discontinuity at 0.443701 s
SHTL1 instance 3 discontinuity at 0.443707 s
SHTL1 instance 3 discontinui
ty at 0.443715 s
CV000 instance 2 discontinuity at 0.443722 s
SHTL1 instance 3 discontinuity at 0.443722 s
CV000 instance 2 discontinuity at 0.44373 s
SHTL1 instance 3 discontinuity at 0.44373 s
SHTL1 instance 3 discontinuity at 0.443736 s
SHTL1 instance 3 discontinuity at 0.443744 s
CV000 instance 2 discontinuity at 0.443751 s
SHTL1 instance 3 discontinuity at 0
.443751 s
CV000 instance 2 discontinuity at 0.443759 s
SHTL1 instance 3 discontinuity at 0.443759 s
SHTL1 instance 3 discontinuity at 0.443764 s
SHTL1 instance 3 discontinuity at 0.443772 s
CV000 instance 2 discontinuity at 0.443779 s
CV000 instance 2 discontinuity at 0.443787 s
SHTL1 instance 3 discontinuity at 0.443787 s
SHTL1 instance 3 discontinuity at 0.443795 s
SHTL1 instance 3 discontinuity at 0.443815 s
There is probably an error in your model.
IF YOU HAVE JUST ADDED A NEW SUBMODEL,
CHECK THE DISCONTINUITY HANDLING.
However, you could try the following:
(i) Restart the run as a continuation run.
(ii) Restart the run as a continuation run
with a REDUCED tolerance.
(iii) Repeat the whole run from the beginning
with a REDUCED tolerance.
AMESim model E:\AMEtest\1yeyaxitong_ did an abnormal exit!I

@相太傅 请吧主指点迷津I

求问吧主，出现类似这种错误怎么解决，万分感激

应该是BHC11参数的dead volume设置小了，应该设置大点。

大神们帮我看一下我的这个问题吧，谢谢