First we start out with some standard config stuff: version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname name-that-switch ! boot host router-config-filename tftp-server-IP boot system flash boot system rom enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ! ip name-server 129.173.1.10 clock timezone AST -4 clock summer-time ADT recurring Among other things, this is used to define the prefix handed out to ILMI-attached end stations (including routers). We have a /28 slice of a class C IP net for use by RFC 1577 hosts atm address 39.124f.8100.011f.0001.0001.0000.0000.c6a6.0180.00 The second and third lines will show up by default atm router pnni node 1 level 56 lowest redistribute atm-static Most interfaces will not require any configuration. PVCs have to be explicitly defined to correspond to whatever the end stations are expecting interface ATM0/0/0 description Dalhousie router ! interface ATM0/0/1 description squirrel MBONE router ! interface ATM0/0/2 description GigaPOP Tier_A router atm pvc 0 33 interface ATM0/0/0 0 34 ! interface ATM0/0/3 description NRC/IMB router atm pvc 0 33 interface ATM0/0/2 0 34 interface ATM0/1/0 description Stentor and CA*net2 no atm auto-configuration atm iisp side user version 3.1 atm pvp 9 ! interface ATM0/1/0.9 point-to-point no atm auto-configuration atm iisp side user version 3.1 Set up the management port in the usual way interface ATM2/0/0 ip address 198.166.1.130 255.255.255.240 atm arp-server nsap 39.124F8100011F000100010000.0000C6A60181.00 atm esi-address 0000C6A60182.00 ! interface Ethernet2/0/0 no ip address The switch needs to have its IP default gateway defined ip default-gateway 198.166.1.129 ip classless atm route 39.124F.8100.0120... ATM0/1/0.9 snmp-server community public RO line con 0 line aux 0 line vty 0 4 password xxxxxxxx login ! ntp update-calendar ntp server 192.75.138.129 end