德sup亖ER德 德sup亖ER德
关注数: 2 粉丝数: 4 发帖数: 142 关注贴吧数: 8
大佬帮帮我 tuf 6800xt 总是黑屏 谢谢 字写的比较多 情况写的比较乱 请耐心看一下 谢谢 先说配置 5800x 360水冷 华硕x570e 华硕tuf 6800xt 内存影驰 名人堂 ex4000 16g 电源海韵850w 特此说明一下 不是炫耀配置 真心求教 谢谢 甜甜圈 跑过3~4次 每次30分钟 机器没有任何问题 玩游戏黑屏(还有 有时开机后过几分钟会死机 鼠标能动 别的什么都不能点 任务管理器也点不出来 只能重启)重启进系统后 看amd显卡驱动 通知里面显示有未知问题显卡恢复到默认类似的话 具体记不清啦 前些阵子 玩杀手2 全高特效 不定时 黑屏 然后主板亮白灯(应该是VGA灯) 最快一次 刚进游戏 就黑屏啦 跟重启机器一样 但是又不是重启 风扇转的很快 屏幕显示无信号 只能关机重开 一开始怀疑驱动问题 用DDU卸载驱动 折腾半天 都是下的华硕官方发的驱动 (有一个小细节除了2021.3 发的显卡驱动 别的版本 开机后主板都会报D3 正常是AA 升级最新bios后 正常显示9E )现在装的是华硕官网放的最新驱动 bios也是最新的 现在开机会主板会显示d3 但很快就会变回9E 也回滚过显卡驱动和bios 都不管用 还是不定时黑屏 客服就是摆设 没什么用 给我这当地售后说了情况 他说散热问题 原来是夏天 可是现在是冬天 我在北方 现在就不应该是散热问题了吧 ?! 还说我这不定时黑屏 不好检测 反正就是没办法弄! 该装的驱动 我都安了 例如 芯片组啊 主板啊 都是华硕官网的 我还想过是不是电源小了 我感觉应该不是电源850w应该足够啦 我这几天有怀疑是软件问题 华硕的奥创 和 华硕自己家的显卡调速软件(GPU Tweak)问题 奥创删过 问题一就黑屏 GPU Tweak 我用来调显卡风扇转速 这个软件没删过 会不会GPU Tweak 调速 跟amd驱动有冲突?(amd显卡驱动自带调速我没动过 都是默认的) 电脑2021.6 组装完后 玩3个小时 会黑屏2次 我感觉游戏色配置要求高 开高特效 黑屏就比较多2~3天黑屏一次 特效调低 黑屏次数少 间隔天数也长 主要玩坦克世界 和 单机 坦克世界 现在1080p 高特效 一周的有1~2次黑屏 之前 杀手2 2k全高1~2 天就黑屏一次 后来改1080p 黑屏次数减少 现在玩四海兄弟1~3 这3个游戏到是没有黑过屏(3代是全高特效 但是帧数 我限制60帧 要是不限帧数 显卡会跑满 我怕显卡太累 所以就限制了帧数在60帧) 本人能力有限 写的比较杂乱 请多包涵 希望大佬帮帮我 解决黑屏问题 谢谢!!!!
好心的 大佬帮帮我吧 tuf 6800xt总是掉驱动 字写的比较多 情况写的比较乱 请耐心看一下 谢谢 先说配置 5800x 360水冷 华硕x570e 华硕tuf 6800xt 内存影驰 名人堂 ex4000 16g 电源海韵850w 特此说明一下 不是炫耀配置 真心求教 谢谢 甜甜圈 跑过3~4次 每次30分钟 机器没有任何问题 玩游戏黑屏(还有 有时开机后过几分钟会死机 鼠标能动 别的什么都不能点 任务管理器也点不出来 只能重启)重启进系统后 看amd显卡驱动 通知里面显示有未知问题显卡恢复到默认类似的话 具体记不清啦 前些阵子 玩杀手2 全高特效 不定时 黑屏 然后主板亮白灯(应该是VGA灯) 最快一次 刚进游戏 就黑屏啦 跟重启机器一样 但是又不是重启 风扇转的很快 屏幕显示无信号 只能关机重开 一开始怀疑驱动问题 用DDU卸载驱动 折腾半天 都是下的华硕官方发的驱动 (有一个小细节除了2021.3 发的显卡驱动 别的版本 开机后主板都会报D3 正常是AA 升级最新bios后 正常显示9E )现在装的是华硕官网放的最新驱动 bios也是最新的 现在开机会主板会显示d3 但很快就会变回9E 也回滚过显卡驱动和bios 都不管用 还是不定时黑屏 客服就是摆设 没什么用 给我这当地售后说了情况 他说散热问题 原来是夏天 可是现在是冬天 我在北方 现在就不应该是散热问题了吧 ?! 还说我这不定时黑屏 不好检测 反正就是没办法弄! 该装的驱动 我都安了 例如 芯片组啊 主板啊 都是华硕官网的 我还想过是不是电源小了 我感觉应该不是电源850w应该足够啦 我这几天有怀疑是软件问题 华硕的奥创 和 华硕自己家的显卡调速软件(GPU Tweak)问题 奥创删过 问题一就黑屏 GPU Tweak 我用来调显卡风扇转速 这个软件没删过 会不会GPU Tweak 调速 跟amd驱动有冲突?(amd显卡驱动自带调速我没动过 都是默认的) 电脑2021.6 组装完后 玩3个小时 会黑屏2次 我感觉游戏色配置要求高 开高特效 黑屏就比较多2~3天黑屏一次 特效调低 黑屏次数少 间隔天数也长 主要玩坦克世界 和 单机 坦克世界 现在1080p 高特效 一周的有1~2次黑屏 之前 杀手2 2k全高1~2 天就黑屏一次 后来改1080p 黑屏次数减少 现在玩四海兄弟1~3 这3个游戏到是没有黑过屏(3代是全高特效 但是帧数 我限制60帧 要是不限帧数 显卡会跑满 我怕显卡太累 所以就限制了帧数在60帧) 本人能力有限 写的比较杂乱 请多包涵 希望大佬帮帮我 解决黑屏问题 谢谢!!!!
没氪箱子或氪了没出车的 进来看看 首先我劝 没氪箱子或氪了一组没出车的现在最好别氪了 我感觉爆率变了!! 说说我的情况 上架第一天 我就去看了直播 看了亚服 出车太轻松 看的流口水 国服虽然不让播 倒是还有顶风作案的 感觉爆率可以 一组50个 出两车再加几个皮肤 直播房间50%人能出 还有出3车 4车的 不是直播 我都不敢相信 3车? 4车?一组出的? 🐶托? 但这是真的! 有人会问了 没有非洲人吗? 1辆车不出的 有确实有! 但 不多! 最少出1辆车加几个皮肤 有人该说啦 你看的时间短! 对我是没看太长时间 也就1个小时左右 我换着房间看的 情况差不多! 再来说说我自己 看完直播我第一天就氪了一组箱子 出了暴风 1008 皮肤 白兔 140 vip50几天 银币 忘了 金币 2000左右 (箱子里爆的) 小车 齐了 说实话 我开完后 按第一天爆率 感觉也就不赔不赚 因为比我出车好的有的是 太多啦 最近再看贴吧 都是一组不出车 我劝大家别氪啦 改爆率几率很大!!!真的 还有就是 为什么前3天不让直播开箱? 爆率太低? 怕看了都不来氪了? 错啦! 很可能是策划欲擒故纵!!! 第一天上架箱子 肯定观望的人多 不让直播 有人偷着播 这样是不是很勾人! 开的人多啦 爆率大家觉得可以 就慢慢传开了 氪的人多啦 就到收韭菜的时候啦! 我感觉现在就是收韭菜的时候!! 所以我劝大家还是先别氪了 再观望观望
【蓝屏求助】win10 不定时蓝屏 求大神帮忙 Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\061816-34906-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: *** Invalid *** **************************************************************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * **************************************************************************** Executable search path is: ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* Unable to load image ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows 7 Kernel Version 10586 MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Machine Name: Kernel base = 0xfffff800`a6c1d000 PsLoadedModuleList = 0xfffff800`a6efbcf0 Debug session time: Sat Jun 18 15:48:41.275 2016 (UTC + 8:00) System Uptime: 0 days 0:36:00.457 ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* Unable to load image ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols ............................................................... ................................................................ ................................................................ .............. Loading User Symbols Loading unloaded module list ..................... Cannot read PEB32 from WOW64 TEB32 0000c2e4 - Win32 error 0n30 ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 109, {a3a01f59b228baf5, b3b72be004a9742a, 2, 18} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* Probably caused by : hardware_ram ( PAGE_NOT_ZERO ) Followup: MachineOwner --------- *** Memory manager detected 49892 instance(s) of page corruption, target is likely to have memory corruption. win10不定期蓝屏 求大神帮忙 内存用win10自带检测没有问题
1 下一页