淡淡的悲戚的个人资料

求助高手们看看TTL线刷新出现的命令，不会用宝宝变绿灯，用TTL线刷不成，以前的教程贴中的命令都不管用，输入？出现以下命令，高手们看看，还有不知到系统是机器审贴还是眼瞎，说这是广告交易贴，真是日了狗了。 adc - M6 ADC test autoping- do auto ping test autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure bmp - manipulate BMP image data boardid_prefetch- boardid sub-system boot - SPI-NAND-COMPATIBLE bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol cali - configure clock phare calinfo - calinfo print the chip calibration info cbusreg - cbus register read/write chpart - change active partition clear_rebootmode- clear rebootmode clkmsr - measure PLL clock cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation data - SPI-NAND-COMPATIBLE || SPI-NAND-EMMC-COMPATIBLE dcache - enable or disable data cache defenv - default environment defenv_without- defenv without environment variables dhcp - boot image via network using DHCP/TFTP protocol dtbinit - init some env by reading dtb file dtbload - load binary dtb file from a dos filesystem echo - echo args to console editenv - edit environment variable efuse - efuse version/licence/mac/hdcp/usid read/write or dump raw efuse data commands or info(display chip efuse info) env - environment handling commands ethchk - check ethernet status ethdbg - set ethernet debug level ethmode - set ethernet mac mode ethrst - reset ethernet phy exit - exit script ext2load- load binary file from a Ext2 filesystem ext2ls - list files in a directory (default /) false - do nothing, unsuccessfully fatexist- find the file from a dos filesystem fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) fdt - flattened device tree utility commands get_img_size- get img size and save the result as a environment variable get_rebootmode- get reboot mode go - start application at address 'addr' gset - gpio commands help - print command description/usage icache - enable or disable instruction cache imgread - Read the image from internal flash with actual size imxtract- extract a part of a multi-image itest - return true/false on integer compare keyunify- key unify sub-system kgdb - enter gdb remote debug mode loadb - load binary file over serial line (kermit mode) loadenv - load environment at address 'addr' loads - load S-Record file over serial line loadx - load binary file over serial line (xmodem mode) loady - load binary file over serial line (ymodem mode) logo - logo sub-system loop - infinite loop on address range macreg - ethernet mac register read/write/dump md - memory display mdc_clk - do mdc clock mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcdump - mmc data load mmcinfo - display MMC info msleep - delay execution for some time msr - Meson msr sub-system mtdparts- define flash/nand partitions mtest - simple RAM read/write test mw - memory write (fill) nand - NAND sub-system nboot - boot from NAND device netspd_f- enforce eth speed nm - memory modify (constant address) phyreg - ethernet phy register read/write/dump ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables pwm - pwm sub-system rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU run - run commands in an environment variable saradc - saradc sub-system saveenv - save environment variables to persistent storage sdc_burn- Burning with amlogic format package in sdmmc sdc_update- Burning a partition with image file in sdmmc card secukey - security KEY sub-system setenv - set environment variables sf - SPI flash sub-system showvar - print local hushshell variables sleep - delay execution for some time source - run script from memory ssecukey- NAND KEY sub-system suspend - suspend test - minimal test like /bin/sh tftpboot- boot image via network using TFTP protocol true - do nothing, successfully ubi - ubi commands ubifsload- load file from an UBIFS filesystem ubifsls - list files in a directory ubifsmount- mount UBIFS volume ubifsumount- unmount UBIFS volume unifykey- unifykey read/write based on the driver keymanage unpackimg- unpack imgpack to single update - Enter v2 usbburning mode usb - USB sub-system usbbc - test usb bc usbboot - boot from USB device usid_prefetch- usid sub-system uuid_prefetch- uuid sub-system version - print monitor, compiler and linker version video - video sub-system m8b_m201_1G#

请大神看看TTL刷机问题前几天半夜宝宝变绿灯了，买了TTL线刷机，出现的情况和教程有出入，用CRT老出现命令错误，输入？出现一下 m8b_m201_1G# ? - alias for 'help' adc - M6 ADC test autoping- do auto ping test autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure bmp - manipulate BMP image data boardid_prefetch- boardid sub-system boot - SPI-NAND-COMPATIBLE bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol cali - configure clock phare calinfo - calinfo print the chip calibration info cbusreg - cbus register read/write chpart - change active partition clear_rebootmode- clear rebootmode clkmsr - measure PLL clock cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation data - SPI-NAND-COMPATIBLE || SPI-NAND-EMMC-COMPATIBLE dcache - enable or disable data cache defenv - default environment defenv_without- defenv without environment variables dhcp - boot image via network using DHCP/TFTP protocol dtbinit - init some env by reading dtb file dtbload - load binary dtb file from a dos filesystem echo - echo args to console editenv - edit environment variable efuse - efuse version/licence/mac/hdcp/usid read/write or dump raw efuse data commands or info(display chip efuse info) env - environment handling commands ethchk - check ethernet status ethdbg - set ethernet debug level ethmode - set ethernet mac mode ethrst - reset ethernet phy exit - exit script ext2load- load binary file from a Ext2 filesystem ext2ls - list files in a directory (default /) false - do nothing, unsuccessfully fatexist- find the file from a dos filesystem fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) fdt - flattened device tree utility commands get_img_size- get img size and save the result as a environment variable get_rebootmode- get reboot mode go - start application at address 'addr' gset - gpio commands help - print command description/usage icache - enable or disable instruction cache imgread - Read the image from internal flash with actual size imxtract- extract a part of a multi-image itest - return true/false on integer compare keyunify- key unify sub-system kgdb - enter gdb remote debug mode loadb - load binary file over serial line (kermit mode) loadenv - load environment at address 'addr' loads - load S-Record file over serial line loadx - load binary file over serial line (xmodem mode) loady - load binary file over serial line (ymodem mode) logo - logo sub-system loop - infinite loop on address range macreg - ethernet mac register read/write/dump md - memory display mdc_clk - do mdc clock mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcdump - mmc data load mmcinfo - display MMC info msleep - delay execution for some time msr - Meson msr sub-system mtdparts- define flash/nand partitions mtest - simple RAM read/write test mw - memory write (fill) nand - NAND sub-system nboot - boot from NAND device netspd_f- enforce eth speed nm - memory modify (constant address) phyreg - ethernet phy register read/write/dump ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables pwm - pwm sub-system rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU run - run commands in an environment variable saradc - saradc sub-system saveenv - save environment variables to persistent storage sdc_burn- Burning with amlogic format package in sdmmc sdc_update- Burning a partition with image file in sdmmc card secukey - security KEY sub-system setenv - set environment variables sf - SPI flash sub-system showvar - print local hushshell variables sleep - delay execution for some time source - run script from memory ssecukey- NAND KEY sub-system suspend - suspend test - minimal test like /bin/sh tftpboot- boot image via network using TFTP protocol true - do nothing, successfully ubi - ubi commands ubifsload- load file from an UBIFS filesystem ubifsls - list files in a directory ubifsmount- mount UBIFS volume ubifsumount- unmount UBIFS volume unifykey- unifykey read/write based on the driver keymanage unpackimg- unpack imgpack to single update - Enter v2 usbburning mode usb - USB sub-system usbbc - test usb bc usbboot - boot from USB device usid_prefetch- usid sub-system uuid_prefetch- uuid sub-system version - print monitor, compiler and linker version video - video sub-system m8b_m201_1G#df-h Unknown command 'df-h' - try 'help' m8b_m201_1G#

我的这个是怎么回事，越来越慢，直到没上传

河南短信中心号码是多少，能接收不能发送短信 Rt

第三方rom有没有比较省点的？ Rt

请问官方ROM哪个版本BUG少点，比较好用些? RT

请教一个关于共同好友的问题新加一位qq好友，查看资料我与他有共同一好友，请问在哪个地方能看出来共同的一位好友是谁？

百度2代散热如何解决百度2代看久了摸盒子外面感觉烧手，有没有diy解决散热问题的啊？

求刷机工具及刷机驱动 T9108D版的，哪位大神提供一下，谢谢！

中年熊群，相约人生，260694343 中年熊群，相约人生，260694343，只加中年或中年以上

新开的熊群，欢迎加入新开群，U熊天堂（120168673）欢迎各路熊友加入，互相交流